Click here to enlarge

Click here to enlarge



Volcano Updated: 2012-04-16
Connecting...
Connection successful,connected state!
Version: V3.8
SN:006-032-721
Port:COM5
Available Ports:COM3 COM5
Detection initiated...
Vcc: 1
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM44), (VID_1782&PID_4D00)


Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
BOOT Ver: Spreadtrum Boot Block version 1.2
CPU TYPE:SC6610/20 [66100000]
Please select Boot J and try again.
Please change Boot or reduce Baudrate, try it again.
Ready to read/write again, please remove the clip or battery and then re-loaded it.
Detection initiated...
Vcc: 1
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM44), (VID_1782&PID_4D00)


Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
Boot fileSpreadtrum Boot Block version 1.2
CPU TYPE:SC6610/20 [66100000]
FLASH ID: 00F8003200160000
Flash Type:[FIDELIX] FM25Q32
Size:0x400000(4MB)
Reading completed.
The data has been saved in D:\lgnew\gpgdragon\flase1\kenxinda m2\_20120417_163528_FullFlash volcono.bin, size: 4 M.
When R/W IMEI is COM, Detect Type should select 6600(COM) or 8800(COM)
Detection initiated...
Vcc: 1
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM44), (VID_1782&PID_4D00)
Currently only support 8800H
When R/W IMEI is COM, Detect Type should select 6600(COM) or 8800(COM)
Detection initiated...
Vcc: 1
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM44), (VID_1782&PID_4D00)
>>C:\Program Files\Volcano Team\VolcanoBox\PrtScn\PIC_2012_04_17_4_40_22_PM.j pg saved.