Installation have to be performed in two steps:
1. Install DRIVER package. After installation this package you will see Readme file with additional instruction. Please, make exactly all steps that you will see in the Readme document. Don’t skip any step even if you are experienced PC user and you think that this step is not important.
2. Install MAIN package.
After Installation you will see in Program menu shortcuts to program modules. Also you can find drivers and manuals in the “Drivers” and “Documentation” folders.
Here is detailed description of installation process:
3.1. Driver installation (W98/ME)
1. Run: Infinity_Drv.exe
After this installation part will be completed, make the next steps:
2. Run: Program Files\InfinityBox\Drivers\VC6Redist\vcredist.exe
3. Reboot PC
4. Run: Program Files\InfinityBox\Drivers\Smart Card Base Components\SCBase.exe
5. Reboot PC
6. Run: Program Files\InfinityBox\Drivers\Smart Card Base Components\Smclib.exe
7. Reboot PC
8. Run: Program Files\InfinityBox\Drivers\e-gate_W98_Me\Setup.exe
9. Reboot PC
10. Insert Box dongle into USB port
Your system now have three new devices:
1. e-gate Virtual Reader Enumerators -> e-gate Virtual Reader Enumerator
2. Smart card readers -> e-gate USB Smart card reader
3. e-gate USB Smart Cards -> e-gate USB Smart Card
11. Insert Cable and select drivers from folder: Program Files\InfinityBox\Drivers\Cable
12. Reboot PC
3.2. Driver installation (W2K/XP)
1. Run: Infinity_Drv.exe
After this installation part will be completed, make the next steps:
2. Run: Program Files\InfinityBox\Drivers\e-gate_W2k_XP\Setup.exe
3. Insert Box dongle into USB port
Your system now have three new devices:
1. e-gate Virtual Reader Enumerators -> e-gate Virtual Reader Enumerator
2. Smart card readers -> e-gate USB Smart card reader
3. e-gate USB Smart Cards -> e-gate USB Smart Card
4. Insert Cable and select drivers from folder: Program Files\InfinityBox\Drivers\Cable
3.3. Serial Number reader installation
1. Run: Infinity_SNReader.exe
2. Reboot PC
3. Insert dongle and run SNReader.exe:you will get UserName and Passord for support area access at
Infinity BOX 3.4. Program module installation
Run: Infinity_Main.exe
Now you ready to work.
3.5. Updates
1. Download new Exe/Data files from support area.
2. Put new downloaded files into installation folder instead of old files:
Program Files\InfinityBox\Pana
or
Program Files\InfinityBox\Bird-Fly
4. How to start
4.1. Insert dongle
Insert dongle in USB port. When you insert dongle first time, it can be that PC ask you to select folder with dongle drivers. Please, select folder Program Files\InfinityBox\Drivers\e-gate_W2k_XP or Program Files\InfinityBox\Drivers\e-gate_W98_Me. Next time you don’t need to make this procedure again.
4.2. Connect Box
Connect Box to PC via USB cable and select COM-Port.
4.3. Select Com Port (WinXP example)
Make right mouse click on “My Computer” icon and select “Properties”.
Go to page “Hardware” and press “Device Manager” button.
Go to “Ports (COM & LPT)” section and find “Infinity USB Serial Port (COMX)”, where X is your Box COM-Port number. Use this COM-Port No for future operation.
4.4. Start software
If dongle inserted then you will see dongle serial number in right bottom corner of window. Serial number looks like XXXX:YYYY. If you see this number this means that all Ok and you can start work.